Sta-Lok Main Page Sta-Lok Fittings Bar Toggles
 
Bar toggles are machined from solid stainless steel bar in the shape of an eye/jaw toggle used at the end of rigging eyes or on the end of a turnbuckle to allow necessary toggle action. The pin holes are orientated at right angles to each other (orthangal).

Tthey are also used to add length to rigging that would be too short otherwise.
Part
Number
Sta-Lok
Number
Pin
Diameter
Length
Pin to Pin
Fork
Width
SLBT12 38BT 3/8 1-3/4 3/8
SLBT14 716BT 7/16 2-5/16 7/16
SLBT16 12BT 1/2 2-11/16 1/2
SLBT20 58BT 5/8 2-3/4 5/8
SLBT24 34BT 3/4 3-1/4 3/4
SLBT28 78BT 7/8 4-1/16 7/8
SLBT32 100BT 1 4-3/8 1
SLBT34 118BT 1-1/8 5-1/8 1-1/8
SLBT40 114BT 1-1/4 6-1/16 1-1/4
SLBT44 138BT 1-3/8 6-1/16 1-3/8

Specifications subject to change without notice.
Price lists are available for downlading here.

Eyes | Long Eyes | Studs | Long Studs | Connectors | Insulators | Fork Terminals | Bar Toggles | Screws
Turnbuckles | Toggle Forks | Long Toggle Forks |Eye End Only | Fork End Only | Formers | Wedges
Sta-Lok Products

Home | About Us | Products | Services | Contact Us
80 NW 73 Street, Miami, FL 33150   Phone: 305-758-1074   800-458-1074   Fax: 305.754.0257   800-443-0422